1～6 item / All 6 items
The entire bore can be observed through the quartz glass window.
This is an announcement from FC Design Co., Ltd. regarding the "Combustion Visualization Engine Dynamometer."
Since measurements can be taken while keeping the engine speed constant, various evaluations are possible.
The "DA-GX120-EG" is a compact dynamometer powered by a FI engine for student experiments. Ignition timing and fuel injection can be freely set, allowing evaluations similar to those of a full-fledged dynamometer. You can learn everything from the mechanism of the dynamometer to the workings of FI and ignition. Additionally, by connecting a PC with our "FI" system, you can easily set fuel injection and ignition timing. 【Features】 ■ Compact ■ Affordable ■ Simple ■ Easy to use ■ Equipped with an eddy current braking system to apply a constant load to the engine *For more details, please refer to the PDF document or feel free to contact us.
High functionality, high performance, and low cost! With this device, you can learn the mechanisms of fuel injection, ignition, and power measurement!
Introducing the tabletop-sized engine performance evaluation device, "Student Experiment FI Engine Dynamometer." By combining a general-purpose engine with FI, a small eddy current dynamometer, and measurement devices, it enables comprehensive engine testing while freely adjusting the engine settings. The device is compact, measuring 590mm in width, 370mm in depth, and 720mm in height, making it very portable and easy to install. 【Features】 ■ Enables comprehensive engine testing ■ Very compact, easy to transport and install ■ Ignition timing and fuel injection can be freely set ■ Learn about the mechanisms of fuel injection, ignition, and dynamometers ■ Conduct experiments with a fixed engine speed while applying a constant load to the engine *For more details, please refer to the PDF document or feel free to contact us.
Ignition timing, injection pulse width, injection timing, and various other controls can also be changed!
Introducing the "Visualization Research Engine Dynamometer" for combustion studies. The engine is a KLX250, with a bore and stroke of 72*61.2mm. The cylinder is made of quartz glass, and the piston features a quartz glass window of Φ60mm, allowing for nearly the entire bore to be observed. Before operation, the oil and water temperature is adjusted using a temperature control device for warming up, enabling immediate start and ignition operation. The top surface of the device's housing is spacious, allowing for the placement of disassembled parts and tools. 【Features】 ■ Engine: KLX250, B*S=72*61.2mm ■ Cylinder: Quartz glass ■ Piston: Nearly the entire bore can be observed through a Φ60mm quartz glass window ■ Warm-up with a temperature control device for oil and water before operation, allowing for immediate start and ignition ■ Various controls such as ignition timing, injection pulse width, and injection timing can also be modified *For more details, please refer to the PDF document or feel free to contact us.
For research, universities, and student experiments! The borescope is oriented for easy observation!
In response to the request for a visualization engine dynamometer based on a small engine, we have installed a borescope on Robin's EH12 (the dynamometer is DA10UW). There is only space on both sides of the spark plug, but we used the spark plug hole for the borescope and inserted a thinner spark plug in the side space. Unlike the GX120, the cylinder is upright, making the orientation of the borescope easier to observe. 【Features】 ■ The newly installed spark plug is M10 ■ The combustion pressure sensor is inserted from the side of the intake port ■ The borescope is an OLYMPUS model with a diameter of 8.1mm ■ The glass window of the shield has been enlarged to accommodate the thicker borescope ■ Comparative tests were conducted with plugs installed on both sides, confirming that there is no significant difference *For more details, please refer to the PDF document or feel free to contact us.
![[Test Equipment Manufacturing Example] Engine Dynamometer](https://image.mono.ipros.com/public/product/image/89a/2001102099/IPROS13012732730143808072.png?w=280&h=280)
Various achievements such as the "ECDY Measurement Control Panel"! Here we introduce examples of the production of "Engine Dynamometers."
We would like to introduce examples of the production of "Engine Power Meters." We have a wealth of production experience, including the "ECDY Measurement Control Panel," "ECDY Measurement CPU System," and "FCDY Measurement CPU System." Whether it involves the production of the entire system, including machinery and electrical components, or just the electrical components, or only the construction of the system within the device, we provide products tailored to our customers' needs. 【Products Manufactured (Partial)】 ■ ECDY Measurement Control Panel ■ ECDY Measurement CPU System ■ FCDY Measurement CPU System ■ ECDY Control Unit *For more details, please refer to the PDF materials or feel free to contact us.
